Kodachrome 64 (X-Trans IV)

by Fuji X Weekly— (0)1 downloads

About this recipe

Kodachrome 64 (X-Trans IV) is a free Fujifilm film simulation recipe by Fuji X Weekly, based on Classic Chrome. Enter the settings below in a custom setting on the camera, or import the .FP1 profile into Fujifilm X Raw Studio. An approximate Nikon .NP3 version can be downloaded from this page.

Fujifilm recipe — original article: https://fujixweekly.com/2020/05/27/my-fujifilm-x100v-kodachrome-64-film-simulation-recipe/

Fujifilm parameters

set in camera

Film Simulation: Classic Chrome
Dynamic Range: DR200
Highlight: 0
Shadow: 0
Color: +2
Sharpness: +1
High ISO NR: -4
Clarity: +3
Grain Effect: WEAK
Grain Size: SMALL
Color Chrome Effect: STRONG
Color Chrome FX Blue: WEAK
White Balance: DAYLIGHT

Before using this recipe

This recipe or downloadable preset may not include all settings recommended by the original creator. For the intended look, also set the recommended White Balance, WB shift, exposure compensation (EV), and any other camera settings.

Recommended settings

Values recorded in this library are shown below. Confirm them against the creator’s current instructions.

White Balance: DAYLIGHT
Grain effect: WEAK
Grain size: SMALL

Not recorded here yet: WB shift, Exposure compensation (EV). Check the creator’s original recipe for them.

Please visit Fuji X Weekly — original recipe page for complete instructions and the latest updates. The recipe or file hosted here may be an older version.

How to apply

Fujifilm · In-camera settings

In-Camera Custom Slot (C1–C7)

For: Fujifilm X-Trans and GFX cameras

1
Check your sensor generation
Confirm your camera supports the required simulation (e.g. Classic Neg on X-Trans IV/V, Reala Ace on X-Trans V). Use our Cross-Sensor Converter if your body lacks any setting.
2
Enter the color settings
Set Film Simulation, Dynamic Range, Highlight, Shadow, Color, Sharpness, Noise Reduction, Grain, Clarity, and Color Chrome Effects as listed.
MENUImage quality setting
3
Set White Balance & Shift
Select White Balance mode (Auto, Daylight, or Kelvin), then dial in the Red & Blue shift offsets.
MENUImage quality settingWhite balance
4
Save to custom slot
Store everything in an open custom slot (C1–C7) and rename it with the recipe title.
MENUImage quality settingEdit/Save custom settingC1–C7
5
Assign to Q Menu & shoot
Select your custom slot via the Q Menu before shooting. Adjust exposure compensation according to the recipe's EV guide.

X Raw Studio (.FP1 Profile)

For: Users editing RAW files via computer tethering

1
Download the .FP1 file
Save the profile to your computer from the Download section.
2
Connect your camera via USB
Launch Fujifilm X Raw Studio and connect your camera in 'USB RAW CONV.' mode.
3
Import profile into User Profiles
In X Raw Studio, click 'User Profile' › 'Import' and select the downloaded .FP1 file to batch-process your photos with the recipe.

White balance shift (Red & Blue) is critical — missing it changes the whole film color palette.
Save recipes in custom slots (C1–C7) and configure the Q Menu for quick access in the field.
If your camera is an older sensor generation (X-Trans I/II/III), use our Cross-Sensor Converter to translate simulations to Classic Chrome with compensated tone curves.
X-T3 lacks Clarity and Classic Neg; X-T30 II includes both. X100VI and X-T5/X-T50 add Reala Ace.
Menu names vary slightly by model and firmware.

Fujifilm setup guide ↗Cross-Sensor Compatibility Converter ↗Tune recipe in Recipe Builder ↗