Film Hub

Dial in the settings

Set up a Fujifilm film recipe

Most Fujifilm recipes are a set of in-camera values rather than a downloadable file. Film simulations and adjustment ranges vary by sensor generation and model.

For Fujifilm X and GFX cameras with film simulations

Step by step

Set it up in four steps

  1. 01

    Match your camera

    Check the recipe’s compatible camera notes and confirm that its base film simulation exists on your body.

  2. 02

    Enter the image settings

    In Image Quality Setting, set Film Simulation, Dynamic Range, White Balance and its shift, then tone, color, grain, sharpness and noise reduction as listed.

  3. 03

    Save a custom setting

    Use Edit/Save Custom Setting to store the values in an available custom slot. Give it a recognizable name if your camera allows it.

  4. 04

    Select the preset and shoot

    Recall the custom setting before shooting. Take a test JPEG, then adjust exposure and white balance for your light.

Good to know

  • White balance shift is easy to miss and can change the whole color palette.
  • Some older bodies do not offer every recipe parameter; use the closest available setting.
  • The displayed menu and number of custom slots depend on the model.

Camera menus vary by model. For exact controls, see the Fujifilm custom setting manual ↗ and your model’s manual.